Panther

CNC controlled cutting machine in light gantry design with excellent static and dynamic characteristics, equipped with precisely machined and ground guide profiles. The drive is ensured by means of the powerful form-fit double-sided servo drives.

CNC - thermal cutting machine panther

Allows not only to cut sheets with oxyfuel and plasma, but also tubes and square pipes with plasma

Integrated extraction table with automatic switching of particular extraction sections directly from control system.
Construction of the table is equipped with a rotation axis and four-jaw chuck for tubes or square pipes.
Four-jaw chuck enables to clamp the tubes up to diameter 300 mm, 15 mm tube thickness. Horizontal pipe is supported by means of support rollers
For square pipes this equipment must be equipped with special rolling devices
Discharge of slag
Oxyfuel cutting up to 100 mm material thickness
CNC control system, standing separately next to the machine on the mobile stand
Max. Speed of the machine 40 m/min

Pipe cutting device

Mgm control system enables cutting plans for pipes to be made directly on the thermal cutting machine using pipe cut software.

With simple commands on the touch screen you can make the composition of the task in the 3d model (rotation, position) and enter the dimensions and then generate an essi plan that is immediately ready for cutting.

2d penetrations can be used when it comes to simple cuts and it is not necessary to make sophisticated 3d penetrations. The penetrations imported from the external programming station in the essi format (for example sapsprow) are supported with the cutting and marking technology and are used to make complicated shaped cuts when the predefined shaped cuts are not sufficient.

Pipe diameter up to 250 mm, steel 125 max.

Discharge of the slag

The slag produced during thermal cutting also falls through the meshes of the grates onto the conveyor, which conveys the slag from the extracted table into a mobile slag container.
Automatic removal of the slag for greater work safety and great time savings for the operator.

Plasma power source Q series

The newly developed, pioneering q series plasma cutting system offers excellent marking and cutting quality.

Proven cutting technologies such as contourcut, contourcut speed and silentcut are expanded to include the optimized q-mark and q-hole processes.

The inverter power sources with digitally controlled process sequence create the technological prerequisites for digitization on the way to industry 4.0. The modular design enables the subsequent upgrading of the plant performance. The associated system components such as gas console, plasma torch and connection unit can be adapted to all current and future systems. By means of the human machine interface "q-desk", real-time process data and information of all plant components are made available for diagnosis and prognosis on commercially available end devices, independent of location:

Preview of maintenance and service tasks
Integration of database, training and service updates
Process and error analysis

Plasma power source XPR series

The systems offer unmatched cut quality on mild steel, alloy steel and aluminium, higher cutting speed, vastly improved productivity and 50% lower operating costs. Their new user-friendly features and system optimizations make the xpr systems easier to operate, minimizing required operator intervention while ensuring optimal performance and reliability. These improvements are thanks to a series of new process technologies that hypertherm calls x-definition tm cutting. Hyflow vortex technology or vented nozzle - unique, two-piece vented nozzle design that aligns and focuses the plasma arc to achieve better arc stability and energy density. This results in cleaner, sharper and more consistent edge quality on any mild steel, stainless steel and aluminium. Vented water injection tm (vwi) - patent pending process using vented n2 plasma gas and h2o secondary gas for low angularity and more square cut edges on stainless steel and especially aluminium. Advanced arc stability - technology that alters the impingement of the secondary gas to improve arc stability when cutting from a pierced hole or an acute angle. This reduces entry lengths and improves cut quality.

Kemper suction device

Filter unit with automatic filter cleaning, as well as the fan unit.
The unit is a consistent further development according to the new BIA standard.
With the central filter unit, the Teflon-coated filter cartridges are cleaned individually, one after the other, depending on the differential pressure. The Teflon-coated filter cartridges meet the requirements of the BIA classification L, M, and C.
The filtration efficiency is 99.9 %. An optimally tuned cleaning system by means of compressed air and the use of rotary nozzles ensure optimum extraction performance throughout the entire extraction performance even during the entire cleaning process.
The cleaned particles are collected in a collection container.
Sound pressure level at 1 m distance: < 65 dB (A)
The built-in Siemens PLC controls both the operation of the fan and the cleaning of the filter cartridges. And the cleaning of the filter cartridges are controlled and monitored.
Simple and quick installation

Sideros suction device

Motor fan on the roof of the filter unit, equipped with a suitable motor.
Noise protection box to reduce the noise level of the motor fan. The use of high pressure and high power motors (>15 kW) causes an increase in the noise level.
Spark collector with control door
Dust collector with sufficiently sized drawer.
Tank for compressed air. The tank follows the European Directive 87/404 EEC. The tank is equipped with electrovalves for switching on the automatic cleaning system.
Pressure reducer for compressed air complete with manometer.
Non-return valve in the filter unit housing for pulse cleaning. Possibility for indoor/outdoor installation:
Control panel with starting system for motor fan on the filter unit;
Control panel on the filter unit for the cartridge cleaning system.

Torch suspension M 4000 PCS

Transverse carriage with tactile initial detection and height adjustment
High accuracy by means of arc-dependent scanning
CNC controlled height adjustment
With 3D collision protection
Maintenance free
Stroke 220 mm or optional 350 mm
For torch diameter 30-53 mm
Lifting speed max. 120 mm/s
Lifting capacity max. 12 kg or optionally 30 kg

Torch suspension m 4000 CAP

Transverse carriage with motorized up-stroke system
High accuracy by means of capacitive sensing
With vertical collision protection
Maintenance free
Stroke 220 mm or optional 350 mm
For torch diameter 30-54 mm
Stroke speed 80 mm/s
Load capacity max. 12 kg or optionally 30 kg

New torch suspension

Transversal carriage with tactile or potential-free initial detection and servo-controlled height adjustment directly from CNC control system
Stroke 250 mm or optional 350 mm
Integrated 3D collision protection with sensor and magnetic holder of the torch
Maintenance free

Oxyfuel supply FlowProp

Gas volume control by means of proportional valves
Central solenoid valves
Gas distribution block to supply the oxyfuel burners
With automatic piercing up to 100 mm
Possibility of manual interventions in the gas settings given by the database